Epson SC-F9200 series User Manual page 65

SC-F9200 Series User's Guide
C
Open the front cover.
D
Raise the media loading lever.
E
Remove stains on the pressure rollers using a dry,
soft cloth.
Slide a dry cloth between the pressure rollers and
the platen and over the upper part of the pressure
rollers to wipe the area.
c
Important:
Do not press strongly on the rollers when
wiping. This may detach the rollers.
Maintenance
F
Wipe lint, dust, and adhered ink from the platen
using a brush or soft cloth that has been soaked in
water and squeezed well.
Carefully remove lint and dust stuck in the
groove of the platen.
G
Wipe off the media holding plates using a soft
cloth that has been soaked in water.
Normally, wipe off any lint and dust that has
attached to the surface, without removing the
media holding plates.
When media with glue is used or ink has adhered
to the surface of the media holding plates,
remove the plates, and wipe stains off both the
front and rear surfaces.
When stains are removed, be sure to attach the
plates to their original positions.
Removing and attaching the media holding
plates
"Replacing the media holding plates" on
U
page 78
H
After cleaning, close the front cover.
65