Epson SC-F9200 series User Manual page 97

SC-F9200 Series User's Guide
Item
Side Margin(Right)
Side Margin(Left)
Print Start Position
Margin Between Pages
Normal
No Margin
Media Size Check
Media End Check
Media Skew Check
Media End Option
Print Nozzle Pattern
Periodical Cleaning
Using the Control Panel Menu
Parameter Explanation
3 to 25mm (0.12 to Choose the width of the right margin when media is loaded in the printer.
1.00inch) See the following for more information.
"Printable area" on page 53
U
3 to 25mm (0.12 to Choose the width of the left margin when media is loaded in the printer.
1.00inch) See the following for more information.
"Printable area" on page 53
U
0 to 800 mm (0.00 Adjust this parameter if you want to print from the near center of the
to 32.00 inch) media or if you want to shift the printed area left from the Side
Margin(Right) setting. The area between the right edge of the media and
Print Start Position is left blank. If a value is selected for Side
Margin(Right), an additional area corresponding to the width selected
for Side Margin(Right) will be left blank. See the following for more
information.
"Printable area" on page 53
U
Allows you to enter a margin between pages. Even after making
adjustments, the size of the margin may change depending on the media
-
and usage environment.
The margin increases when the number is moved in the + direction, and
-10 mm to +10 mm
decreases when the number is moved in the - direction.
"Printable area" on page 53
U
On
Choose whether the printer automatically detects (On), or does not
automatically detect (Off),the size of the media when the media is loaded.
Off
We generally recommend to operate with this setting set to On.
Try Off if the printer displays a Media Size Error when the media is
correctly loaded. Note, however, that the printer may print beyond the
edges of the media when Off is selected. Ink used outside the edges of the
media will stain the inside of the printer.
Changed settings are reflected when the media is re-loaded.
On Choose whether the printer automatically detects (On) or does not
automatically detect (Off), the end of the media. Try Off if the printer
Off
displays Media Out when the media is correctly loaded. We generally
recommend to operate with this setting set to On.
On When skewed media is detected, the printer will either stop printing and
display an error (On) or continue printing (Off). On is recommended in
Off
most circumstances, as skewed media may cause the printer to jam.
Continue Select whether or not (Continue/Stop Printing) to print the remaining
data after replacement.
Stop Printing
Off Select the frequency with which the printer prints a nozzle test pattern:
never (Off) or once every 1 to 10 pages. Periodic test patterns will not be
1 to 10 pages
printed while Off is selected. To print a test pattern at the top of every 1 to
10 pages, select an option between 1 and 10. When printing is complete,
you can visually inspect the pattern to determine whether there may be
faint or missing colors in the preceding or following printout.
97