Epson SC-F9200 series User Manual page 60

SC-F9200 Series User's Guide
B
After the print head moves to the left end of the
printer, open the left maintenance cover.
C
Dampen the cleaning stick (wide) with ink
cleaner.
Use new cleaning stick and ink cleaner.
"Using Ink Cleaner" on page 59
U
D
Wipe off any adhered ink, lint, and dust from the
parts that are indicated by
c
Important:
Do not touch the parts framed below. Failure
to observe this precaution could affect print
quality.
Maintenance
below.
E
60
Left-hand print head
Right-hand print head
Ink is prone to adhere to the areas indicated by
the arrows, so be sure to wipe off any ink found.
If any lint or dust is caught, hook it using the tip of
a cleaning stick.
Apply ink cleaner to the areas indicated by the
arrows to dissolve adhered ink stains.
c
Important:
When applying ink cleaner, make sure you do
not press too hard on the nozzles (parts
indicated by shown below). Also, make
sure you move the cleaning stick in one
direction; do not move it back and forth.