Table of Contents
Advertisement
4-3-1 Loop Recording
To execute loop recording
You can now record from the beginning to end of a material and store it as a
loop.
Note
You cannot specify loop recording from the control panel when the MAV-777
is in BVE mode.
1
In the CP Setup mode, select Loop in menu item 0002: Record Loading
Option.
When you want to specify a recorder port (R1 to R3), set to "Individual".
CP setup mode items 5001, 5002, and 5003 "Record Loading Option R1
(R2 or R3)" become effective, and "LOOP" becomes available. At the
same time CP setup mode items 5004, 5005, and 5006 "Record Allocate
Length R1 (R2 or R3)" become effective and time can be allocated to each
recording port (R1 to R3) at the time of recording.
2
Use the PORT SELECT button to select the recording port.
3
Hold down the REC button and press the PLAY button to start recording.
You see LOOP displayed in the current port area of the LCD display.
Notes
• If the reference points in a program are overwritten when loop recording, you
can update the program and continue editing.
• If the power goes off during loop recording, turn on the power, and at an
unused recorder port, press function key B1 (Load) while pressing the EDIT
button and reload the appropriate material. Resume loop recording.
For details about loading material, see section "3-2-6 Loading and Unloading
Material (LOAD/UNLOAD)" (page 3-7).
4-5 (E)
Chapter 4 Recording
Advertisement
Table of Contents
