Sony MAV-777 Operation Manual page 73

Effect dialog box key assignments
The following is the list of function keys (L1 to L11 and B1 to B7) and
description of how they are used in the Effect dialog box.
Key Function name
(caption)
L1 Pattern
L2 Trans Time
L3 Audio Trans
Time
L4 Border W
L5 Border L
L6 Border S
L7 Border H
L11 Manual Trans
B1 Next Param
B2 Auto Trans
B3 Memory
Shortcut
B4 Fit Audio
Trans
B6 Cancel
B7 OK
SHIFT+L1 1 to 9
to
SHIFT+L9
SHIFT+10 0
SHIFT+B2 Backspace
SHIFT+B3 Delete
Shortcut
Description
Moves the cursor to the effect pattern selection area.
Moves the cursor to the transition time.
Moves the cursor to the audio transition time.
Moves the cursor to the border.
Moves the cursor to the border luminance.
Moves the cursor to the border saturation.
Moves the cursor to the border hue.
Allows the fader position to be moved with the MULTI
CONTROL knob.
Selects the parameter next to the currently selected
parameter.
Conducts auto transition with the current settings.
Enabled only when a transition time is set for a pattern
that can be set.
Sets the device in the shortcut registration standby
mode.
For details about registering and deleting shortcuts, see
Section "Using Shortcuts" (page 3-51).
Sets the audio transition time to the current transition
time settings. Rounded up if less than 1 ms.
Ignores the changes to the contents of effects in the
Effect dialog box and closes it.
Sets all the changes to the contents of effects in the
Effect dialog box and closes it.
Allows you to enter the numbers 1 to 9 into the currently
selected parameter as the leftmost digit. These keys are
disabled when a parameter that does not allow number
entry is selected.
Allows you to enter a zero into the currently selected
parameter as the leftmost digit. This key is disabled
when a parameter that does not allow number entry is
selected.
Deletes the entry to left of the current position in the
currently selected parameter. This key is disabled when
a parameter that does not allow number entry is
selected.
Sets the device in the shortcut deletion standby mode.
For details about registering and deleting shortcuts, see
Section "Using Shortcuts" (page 3-51).
Chapter 3 Operating Modes
3-49 (E)