Table of Contents
Advertisement
Key
Function name
Description
(caption)
SHIFT
Cut Out
Cuts out an area from the loaded material that is currently
+B3
Material
selected, and creates new material. VIDEO only or AUDIO
only cutouts are not possible.
SHIFT
Protect On/Off
Selects whether material can be deleted and whether
+B4
attributes can be changed.
SHIFT
Rename
Change name of the material.
+ B5
SHIFT
Delete
Deletes material. All material not protected with the Protect
+ B6
feature can be deleted with one execution (Batch Delete).
Use of Delete or Batch Delete is effective only for material
that is not assigned to any port.
SHIFT
Capture New
Switches the stamp picture for material that is assigned to
+ B7
Stamp
the port that is currently the subject of operation.
* Material stamp screens can be numbered 0001 through
For details about how to enter time data, see Section 3-7-1, "Time Data Entry Dialog
Box" (page 3-42).
For Material Monitor settings, see Section 3-6, "CP Setup Mode" (page 3-34).
For details on BVE mode, see Section 5-4, "Basic Operations in BVE Mode" of
Volume I of this Operation Manual.
When EXT1 or EXT2 is assigned as the port currently subject of operation, the
B1 key and SHIFT+B1 keys can be used as described below.
Key
Function name
Description
(caption)
B1
Standby On/
Switches Standby On/Off for the external HD VTR assigned
Off
to the port currently the subject of operation.
SHIFT+
Eject
Ejects the cassette mounted in the external HD VTR
B1
assigned to the port currently the subject of operation.
0999. When recording from the control panel, the material
destination screen is automatically recorded as the stamp
screen.
Chapter 3 Operating Modes
3-5 (E)
Advertisement
Table of Contents
