Table of Contents
Advertisement
6-4 Abbreviated Editing
6-4 Abbreviated Editing
To perform abbreviated editing
6-28 (E)
Chapter 6 Editing
After entering Edit mode, you can abbreviate editing by previewing as you set
edit points. Abbreviated editing is only possible when the playback port of the
player device differs from the one selected as the recorder device.
There are two methods to perform abbreviated editing operations: confirming
edits with AUTO EDIT after previewing, the same as in normal editing, or
confirming edits once at the start of editing by pressing the AUTO EDIT
button. Pressing the AUTO EDIT button at the start of editing is more
efficient.
PB EE
TRIM
L1
L2
IN
OUT
L3
AUDIO
L4
ENTRY
L5
L6
IN
OUT
L7
L8
L9
DMC EDIT
DELETE
L10
MEMORY
L1 1
PREVIEW
AUTO EDIT
REVIEW
MODE
SHIFT
B1
2
5
3
1
Press the PLAYER or RECORDER button and select the device that you
want to use, then cue up to the PLAYER and RECORDER IN points.
2
Press the PREVIEW or AUTO EDIT button.
Playback starts from the IN point.
3
When you reach the desired OUT point, hold down the ENTRY button and
press the OUT button. That point is set as the OUT point and the OUT
button stops flashing and lights. The PLAYER and RECORDER stop.
4
If you pressed AUTO EDIT in step 2, the destination material is updated at
the point where you performed step 3.
The PLAYER and RECORDER stop at the OUT point.
5
If you pressed PREVIEW in step 2, press the AUTO EDIT button.
Edits are made and destination material is updated.
When editing is finished, the RECORDER and PLAYER stop at the OUT
point.
Note
If you use the method of pressing the AUTO EDIT button from the beginning,
then you must set menu item 2002: Auto Edit Emulation to On or Off With
SHIFT in CP Setup mode.
PB
HOLD
RESET
TC/UB
TIMER SEL
1
R1
EXT
R2/
2
P3
PLAYER
MULTI
CONTROL
REC
PREROLL
REW
PLAY
B2
B3
B4
B5
B6
B7
Abbreviated editing
SHUTTLE
JOG
VAR
P1
PORT SELECT
R3/
P2
RECORDER
EDIT
F. FWD
STOP
1
Advertisement
Table of Contents
