Table of Contents
Advertisement
3-3 Edit Mode
3-3-6 Searching for Edit P oints
3-3-7 Restoring Pre vious Edit P oints
To recall the last edit point edited or previewed (LAST EDIT)
3-20 (E)
Chapter 3 Operating Modes
To search for edit points using the on-screen command, move the cursor to the
edit point you want to search for (either an IN or OUT point) using the MULTI
CONTROL knob, and press the B7 key (SEARCH).
You can also press the IN or OUT buttons at the same time as the PREROLL
button to search for the corresponding edit points as on an HD VTR.
The value of the last point edited or previewed can be recalled.
To restore last point edited
1
After editing the point with AUTO EDIT, press Last Edit (B4).
The last point edited (Player IN/OUT/DUR point, or Recorder IN/OUT/
DUR point) is displayed. Only the last point registered can be displayed.
2
Correct the edit point as required.
To restore last point previewed
1
To restore the last modified edit point to its previous state, press Last Edit
(B4).
The data of the edit point last subjected to Preview appears.
For details about changing the edit point, see "To modify selected edit points" (page
6-16).
Advertisement
Table of Contents
