Table of Contents
Advertisement
2.1 O ve rvie w
This chapter describes how to access the NBG6604 Web Configurator and provides an overview of its
screens.
The Web Configurator is an HTML-based management interface that allows easy setup and
management of the NBG6604 via Internet browser. Use a browser that supports HTML5, such as Internet
Explorer 11.0 and later versions, Mozilla Firefox 50 and later versions, Safari 10.0 and later versions, Edge
14 and later versions or Google Chrome 54 and later versions. The recommended screen resolution is
1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• JavaScript (enabled by default).
• Java permissions (enabled by default).
Refer to the Troubleshooting chapter
are allowed in Internet Explorer.
2.2 Ac c e ssing the We b C o nfig ura to r
Make sure your NBG6604 hardware is properly connected and prepare your computer or computer
1
network to connect to the NBG6604 (refer to the Quick Start Guide).
Launch your web browser.
2
The NBG6604 is in router mode by default. Type "http://myrouter" as the website address. If the NBG6604
3
obtains a WAN IP address or a DNS server IP address in the same subnet as the LAN IP address
192.168.1.1, the default LAN IP address will be changed to 10.0.0.1 automatically. See
on page 52
If the NBG6604 is in access point mode, the IP address will be 192.168.1.2. See
more information about the modes of the NBG6604.
Your computer must be in the same subnet in order to access this website address.
Intro duc ing the We b
for more information.
NBG6604 User's Guide
C
C o nfig ura to r
(Chapter 15 on page
101) to see how to make sure these functions
14
HA PTER
Auto-IP Change
Chapter 4 on page 25
2
for
Advertisement
Table of Contents
