Channel 5 Switch; Channel 6 Dial; Trainer Function (Student Only) - FUTABA T6L Sport Instruction Manual

6-channel digital proportional r/c system

Hide thumbs Also See for T6L Sport:

Table of Contents

This switch operates the servo connected to channel 5 in the

receiver. If your model has retractable landing gear, this is the

control used to extend and retract the gear.

Movement of channel 5 is only simple on - off.

CH5

This dial operates the servo connected to channel six in the

receiver. If your model is equipped with flaps, this is the

control used to operate them.

Trainer cord available separately

CHANNEL 5 SWITCH

CH6

The T6L Sport-2.4GHz trainer function lets you practice flying as a student

by connecting the T6L Sport-2.4GHz to the instructor's Futaba transmitter.

To utilize the trainer function, the appropriate trainer cord (available

separately) and a second Futaba transmitter (usually provided by your flight

instructor or R/C club) will be required. When two radios are connected

with the trainer cord, they are both capable of operating the model, but it's

usually best for the instructor to hold the radio that has been setup for the

plane to be flown (as it is already programmed to fly the model). When the

instructor holds the trainer switch on his radio, the student will have control.

When the instructor wishes to regain control he simply releases the switch.

Then he will have immediate, full control.

Power application isn't done from teacher's transmitter. Student's T6L Sport

also turns on a power supply.

Table of Contents