Thr-Curve (Acro Only) - FUTABA T8J FUT01004369-3 Instruction Manual

Throttle curve ( THR-CURVE )( ACRO ):
Adjustability:
• Separate curves for each position are available.
GOAL of EXAMPLE:
Adjust throttle curve until engine idles
reliably.
Pit curve ( PIT-CURVE )( ACRO ):
Adjustability:
• Separate curves for each position are available.
GOAL of EXAMPLE:
Adjust pit curve until engine idles .
This function adjusts the throttle operation curve for optimum engine response
to throttle stick movement.
NOTE: If the throttle EXP function is activated, you cannot use THR-CURVE
function simultaneously.
STEPS:
Open the THR-CURVE function.
Activate the function.
position.
Adjust the next switch position.
Close.
This function is an object for the variable pitch propellers of an airplane.
STEPS:
Open the PIT-CURVE function.
Activate the function.
position.
Adjust the next switch position.
Close.
64
INPUTS:
for 1 second.
to THR-CURVE .
to MIX . to ON .
Switch E in up position.
to point 1 ( P-1 ).
throttle servo position.
Repeat above steps.
Repeat above steps.
to SW .
to desired switch.
INPUTS:
for 1 second.
to PIT-CURVE .
to MIX . to ON .
Switch E in up position.
to point 1 ( P-1 ).
Pit position.
Repeat above steps.
Repeat above steps.
to SW .
to desired switch.
to desired
to desired