Installation; Installing Your Terminal; Installation Requirements - Xerox WorkCentre 220 User Manual

2 I
NSTALLATION
I
NSTALLING YOUR TERMINAL
A proper location helps to ensure that your printer provides you with the long service life for which
it is designed. Double-check to make sure that the location you select has the following
characteristics.
• Always locate the equipment in an area that has adequate ventilation, and space for servicing.
• Never operate the equipment if you notice unusual noises or odors. Disconnect the power cord
from the electrical outlet and contact your local Fuji Xerox Service Representative or Service
Provider immediately.
• Plug the power cord directly into a grounded electrical outlet easily accessible. Do not use an
extension cord. If you do not know whether an outlet is grounded, consult a qualified electri-
cian.
• Never locate the equipment near a radiator or any other heat source.
• Do not obstruct the ventilation openings.
• Make sure that you do not block the aeration grill located on the left side of the terminal. When
installing the terminal close to a wall, make sure that the distance between the wall and the rear,
and the wall and the left hand side of the terminal is at least 25 centimeters, to make opening of
the cover easier and so as not to block the aeration grill of the terminal. A poorly ventilated
machine can cause excessive internal heat and fire. The accompanying diagram shows the min-
imum clearances required for normal operation, consumables replacement, and maintenance to
I
NSTALLATION REQUIREMENTS
2-1