Local Network Settings; Automatic Configuration - Xerox WorkCentre 220 User Manual

Setting your machine
Parameter
93 - REPALACE
FORMAT
94 - PRINTER
CLASS
Your terminal is now configured.
L
OCAL
(
DEPENDING ON MODEL
Your terminal is a new generation machine that will be part of your local network just like a PC.
Its built-in local network access card will enable you to send documents through an SMTP/POP3
local message server (internally or externally, depending on the settings of your message server).
To benefit from all the available network options, you should make the following settings,
described in the sections below:
• local network settings, to introduce your fax machine into your local network.
• message service settings, for all your faxes and E-mails to be automatically managed by
your message server.
Note -
own computer configuration. If that is administrated by anyone in your company, we recommend
you ask that person for the settings described below.

Automatic configuration

We recommend that you carry out a manual configuration of your terminal. The automatic
configuration of the local network settings may be considered, if your local network features a
DHCP or BOOTP server that can dynamically assign addresses to the peripheral devices present
on the LAN.
To automatically configure the local network settings:
Choose
DHCP or BOOTP server that can assign its settings dynamically (the message
is displayed).
Setting
1 - NO
2 - Letter / A4
PCL / PC KIT
PC KIT ONLY
A N
REA ETWORK
Although rather simple, network settings sometimes require a sound knowledge of your
L
OCAL NETWORK SETTINGS
2531 OK - SETUP / NETWORKS / LOCAL NETWORK / CONFIGURATION
and press OK to confirm. The terminal scans the local network for a
AUTOMATIC
Signification
Page format change
Printing in PCL-/Postscript Mode
Printing in GDI mode
(LAN)
)
4-11
SETTINGS
SELF-CONF