Installing The Second Paper Tray (Optional) - Xerox WorkCentre 220 User Manual

I
NSTALLING THE SECOND PAPER TRAY
1. Remove the second paper cassette unit
and tray 2 from their packaging,
including the protective tape used to
hold the various components in place.
3. Remove the paper tray cover.
5. Put a stack of 500 paper sheets,
maximum, into the paper tray, making
sure to always position the paper so
that the up-side, when the paper is
packed, is always facing up.
( )
OPTIONAL
2-14
2. Position the printer above the addi-
tional paper tray unit. Align the cou-
pling pins of the additional paper tray
unit with the corresponding notches in
the bottom of the printer.
4. Press the support plate located on the
paper tray until it locks into position.
6. Put the cover back onto the tray, and
insert the paper tray into the additional
paper unit.
Installation