Xerox WorkCentre 220 User Manual page 60

Insert chip card (supplied with the toner cartridge) into the card reader ensuring that the chip is
entered as shown in the drawing below.
The following is displayed on the scanner control panel screen:
CHANGE TONER ?
YES= OK - NO= C
Press OK.
Once the chip card has been read, the display shows:
TONER OK
REMOVE CARD
Remove the card.
Note -
If the following is displayed, check that you have inserted the chip card the right way up:
CANNOT READ CARD
REMOVE CARD
Note -
If the following is displayed, remove the chip card and insert it the right way up, on the green
arrow side:
ILLEGIBLE
CHANGE SIDE
6-8
Maintenance
Green arrow