Access To Connection And Message Service Parameters - Xerox WorkCentre 220 User Manual

Setting your machine
M
ESSAGE SERVICE AND THE
Your terminal lets you send and receive documents and E-mails from subscribers throughout the
world over the Internet.
An E-mail is an electronic message sent over the Internet, to an E-mail address (which is a
personal Internet mailbox).
Access to the Internet is possible thanks to an Internet service provider (ISP). The provider puts
at your disposal a server, or computer system which allows you to connect to the Internet and your
mailbox through your telephone line.
Before worldwide transmission, you must:
• take out an Internet subscription from an Internet Service Provider (ISP),
• check that all initialization parameters correspond to those provided by your ISP,
• perform the proper settings, if needed, for the Internet connection.
You may then connect yourself to the Internet via your ISP to send and receive fax-Internet or
E-mails. Both operations will be performed during an Internet connection.
You must define or, at least check all parameters needed to identify yourself with the Internet.
Your ISP will provide you with these parameters as soon as you are registered with them.
The parameters are divided in three categories:
• connection, allows you to identify the dial up number, the connection identifier and the
connection password,
• message service, allows you to define the message service identifier, the message service
password and the E-Mail address,
• servers, allows you to identify the name of the OP address of Internet SMTP providers
(send) and POP3 (MBX reception) and the address of DNS 1 and DNS 2 servers. The server
address is made up of 4 groups of 3 digits maximum, separated by dots.
• SMTP Authentification, used to activate the authentification protocol when the SMTP
server used requests this to end e-mails.

Access to connection and message service parameters

Select the Internet provider from the list
PROVIDER_3
press OK.
Choosing
Enter the
I
NITIALIZATION PARAMETERS
,
PROVIDER_4
disables access to Internet functions. OK.
NO ACCESS
921 OK - INTERNET / INIT. PROVIDER / CONNECTION
, press OK.
CALL NUMB.
NO ACCESS
, ,
PROVIDER_5 PROVIDER_6
92 OK - INTERNET / INIT. PROVIDER
4-13
I
NTERNET
91 OK - INTERNET / SUPPLIER
, ,
PROVIDER_1 PROVIDER_2
or
LOCAL NETWORK
,
, and