Saving An Access Code; Reception Without Paper; Number Of Copies - Xerox WorkCentre 220 User Manual

Print fax messages stored in the memory
If you have defined an access code for your fax answering machine, enter it and press OK.
Documents received and stored in the memory are printed.
Activating or deactivating the answering machine
If you saved an access code for your fax answering machine, enter it and validate with OK.
Select the required option

Saving an access code

Enter the code (4 digits) and confirm with OK.

Reception without paper

Your fax offers you the possibility to either accept or refuse document reception if your printer is
unavailable (no paper...).
If your fax printer is unavailable, you may choose between two modes of reception:
• reception mode
• reception mode
To select the reception mode:
Select the option
Note -
Paper out is indicated by a beep and a message on the screen. Received faxes are then stored
in memory (icon "Fax messages" flashing) to be printed as soon as you add paper into the feeder.

Number of copies

You may print incoming documents more than once (1 to 99).
To set the number of each document received:
Enter the wanted number of copies and confirm with OK.
At each document reception, your fax will print the number of copies requested.
or
WITH WITHOUT
, your fax saves the incoming messages in the memory,
WITHOUT PAPER
, your fax refuses all incoming subscribers.
WITH PAPER
or
WITH PAPER WITHOUT PAPER
242 OK - SETUP / RECEPTION / NBR OF COPIES
4-6
381 OK - FAX / FAX ANSW. / PRINT
382 OK - FAX / FAX ANSW. / ACTIVATION
answering machine and confirm you choice with OK.
383 OK - FAX / FAX ANSW. / ANSWER CODE
241 OK - SETUP / RECEPTION / REC. PAPER
and confirm your choice with OK.
Setting your machine