Installing The Duplex-Unit (Depending On Model Or Option) - Xerox WorkCentre 220 User Manual

Note -
Always get hold of the paper tray with both hands when removing it or putting it back into the
additional paper unit.
I
NSTALLING THE
(
DEPENDING ON MODEL OR OPTION
After installation and connection, the duplex-unit will enable you to print, receive faxes or to receive
local photocopies in mode.
Switch off your terminal and pull out the mains plug.
Take the duplex unit out of its box and remove the protective film.
C
Remove the connector cover (C) to obtain access to the connector.
D -
UPLEX
2-16
Installation
UNIT
)
A
B