Maintenance
M
ISCELLANEOUS INCIDENTS
At switch-on nothing appears on screen
Check that the mains cable is plugged in, and check the mains plug if necessary.
The machine does not detect the presence of your inserted document. The message
READY
does not appear on the screen.
At the start and during scanning,
appears on the screen.
REMOVE DOCUMENT
.
Remove the document or press key
2
Check the thickness of the document (50 sheets of paper of 80 g/m
).
Iron out the sheets if needed.
Help the sheets along.
You receive a blank page
Make a photocopy of a document ; if it is correct then your machine is functioning normally. Call
back the subscriber and have him resend the document. It was probably sent with the sheet
inserted backwards.
6-23