Operational Precautions - Xerox WorkCentre 220 User Manual

ensure your machine operates at peak performance. Your Xerox representative will provide nec-
essary support for the proper installation of the machine.

Operational precautions

Note the following important precautions whenever using the printer.
Operating Environment
This machine is capable of operating normally within the following recommended environmental
limits.
- Temperature range:
10°C to 35°C with fluctuation of 10°C per hour
- Humidity range:
20% to 80% (no condensation) with fluctuation of 20% per hour
Note -
Sudden temperature fluctuations can affect copy quality. Rapid heating of a cold room can
cause condensation inside the machine, directly interfering with image transfer.
Terminal
The following describes precautions for using the terminal.
• If any of the following conditions occur, switch off the power to the machine immediately and
disconnect the power cord from the electrical outlet. Call an authorized local service representa-
tive to correct the problem.
- The equipment emits unusual noises or odors.
- The power cord is damaged or frayed.
- A wall panel circuit breaker, fuse, or other safety device has been tripped.
- Liquid has spilled into the equipment.
- The equipment is exposed to water.
- Any part of the equipment is damaged.
• When moving the machine, be sure to unplug all cords including the power cord. And if using the
option duplex unit, be sure to remove it. If tilted, the machine may fall over and cause injuries.
• Never remove covers or guards that are fastened with screws. There are no operator serviceable
areas within these covers.
• Do not place objects on the power cord.
2-2
Installation