Front Master Cylinder - Honda V65 MAGNA Shop Manual

HYDRAULIC BRAKES
FRONT MASTER CYLINDER
DISASSEMBLY
Drain brake fluid from the hydraulic system.
Remove the brake lever and rear view mirror from
the master cylinder. Disconnect the brake hose.
CAUTION:
Avoid spilling brake fluid on painted or
plastic surfaces. Place a rag over the fuel tank
whenever the brake system
is
serviced.
NOTE
When removing the oil hose bolt, cover the
end of the hose to prevent contamination.
Secure the hose to prevent fluid from leaking
out.
Remove the master cylinder.
Remove the piston boot and the circlip from the
master cylinder body.
Remove the secondary cup and piston. Then remove
the primary cup and spring.
Remove the brake light switch from the master
cylinder body, if necessary.
Clean the inside of the master cylinder and reservoir
with brake fluid.
~
V65MAGNA
01 L HOSE SaLT
SNAP RING PLIERS
07914-3230001
SECON~/
CUP
PRIMARY CUP
17.. 8 292
Date of Issue: Dec, 1982
© HONDA MOTOR CO., LTD.