Shock Absorber Removal; Shock Absorber Inspection - Honda CRF110F Service Manual

Install the washer (1] and spring (2) onto the brake rod
131·
Install the joint pin [4] onto the brake arm.
Push down the brake pedal and install the brake rod
into the jOint pin.
Install the brake adjusting nul [5] and adjust the brake
pedal freeplay (page 3-16).
SHOCK ABSORBER
REMOVAL
Remove the seat (page 2-4).
Support the motorcycle securely and raise the rear
wheel off the ground with a hoist or equivalent.
Remove the shock absorber lower mounting nut (1 ) and
bolt
121.
Remove the shock absorber upper mounting nut (3),
bolt (4) and shock absorber (5).
Installation is in the reverse order of removal.
TORQUE :
Shock absorber upper mounting nut:
50 N'm (5.1 kgf'm , 37Ibf-ft)
Shock absorber lower mounting nut:
50 N'm (5.1 kgf'm , 37 1bHtl
INSPECTION
REAR WHEEUBRAKE/SUSPENSION
Do
not disassemble
Visually inspect the shock absorber for wear or ,--------~ 1~ 21 ;--------,
the shock absorber.
damage.
Check the following:
- Deformation or oil leakage
- Bushings [1] for wear or damage
- Damper rod (2) for bend or damage
Check the smooth damper operation.
15·15