Regulator/Rectifier - KYMCO XCITING 500 Service Manual

17
. BATTERY/CHARGING SYSTEM XCITING 500
Measure the resistance between each Yellow
wire terminals.
Standard: 0.1－0.5 Ω (20ºC/68ºF)
Check for continuity between each Yellow
wire terminal of the alternator side connector
and ground.
There should be continuity.
Replace the alternator stator if resistance is
out of specification, or if any wire has
continuity to ground.
Alternator Connector
Refer to section 12 for alternator stator
replacement.

REGULATOR/RECTIFIER

Regulator/Rectifier
WIRE HARNESS INSPECTION
Remove the luggage box (page 2-3).
Disconnect the regulator/rectifier connectors.
Check the connectors for loose contacts of
corroded terminals.
Regulator/Rectifier Connectors
Battery line
Measure the voltage between the Red/White
wire terminal and ground.
There should be battery voltage at all times.
Regulator/Rectifier Connector
17-8