KYMCO XCITING 500 Service Manual page 282

16
. BRAKE SYSTEM
Installation steps:
Turn the parking brake caliper piston
clockwise and push it into the parking brake
caliper.
Install the pad pin by pushing the pads
against the pad spring to align the pad pin
holes in the pads and caliper.
＊
Align the pin on the pad with the groove
on the parking brake caliper piston.
Install the rear/parking brake caliper to the
rear fork.
Install and tighten the new rear/parking brake
caliper mounting blots to the specified torque.
Torque: 32 N•m (3.2 kgf•m, 23 lbf•ft)
Parking Brake Caliper Piston
Groove
Rear/Parking Caliper Body
XCITING 500
Pin
Bolts
16-12