Regulator/Rectifier Inspection - KYMCO Bet & Win 250 Manual

16
. BATTERY/CHARGING SYSTEM
A.C. GENERATOR REMOVAL
A.C. generator removal ( 10-3)
A.C. generator installation ( 10-6)
REGULATOR/RECTIFIER
INSPECTION
Remove the frame front cover. ( 2-5)
Remove the regulator/rectifier wire coupler.
Check the continuity between the wire
terminals.
Normal Direction: Continuity
(+) Probe
I Yellow
II Red/White
Reverse Direction: No Continuity
(+) Probe
I Green
II Yellow
VOLTAGE REGULATION TEST
Connect a voltmeter across the battery
terminals.
Start the engine and gradually increase the
engine speed.
The battery terminal voltage should be within
14.0_ 15.0V.
www.PlanDeGraissage.org
(-) Probe
Green
Yellow
Normal
Direction
(-) Probe
Yellow
Red/White
A.C. Generator Stator
Right Crankcase Cover
Regulator/Rectifier
Red/White
Green
Voltage Sensor
Bet & Win 250
Pulser Coil
Bolts
Reverse
Direction
Black
16-6