KYMCO XCITING 500 Service Manual page 130

7. ENGINE REMOVAL/INSTALLATION
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• During engine removal and installation, support the scooter on its main stand.
• Support the frame using a jack or other adjustable support to ease of engine hanger bolt removal.
• The following components require engine removal for serviced with the engine installed in the
frame.
ä Oil pump (Section 4)
ä Water pump (Section 6)
ä Cylinder head (Section 8)
ä Cylinder/Piston (Section 9)
ä Drive and driven pulleys/clutch (Section 10)
ä Final reduction (Section 11)
ä Alternator/Starter clutch (Section 12)
• The following components require engine removal for service.
ä Crankshaft/Crankcase/Balancer (Section 13)
SPECIFICATIONS
Engine dry weight
Engine oil capacity
TORQURE VALUES
Engine mounting bolt
Engine mounting nut
Rear shock absorber lower mounting bolt
Rear/parking brake caliper mounting bolt
Engine hanger mounting bolt
Engine hanger rod nut
7-1
ITEM
At draining
At disassembly
At oil filter cartridge change
80 N•m (8 kgf•m, 58 lbf•ft)
80 N•m (8 kgf•m, 58 lbf•ft)
40 N•m (4 kgf•m, 29 lbf•ft)
32 N•m (3.2 kgf•m, 23 lbf•ft)
ALOCK bolt: replace with a new one
50 N•m (5 kgf•m, 36 lbf•ft)
35 N•m (3.5 kgf•m, 25 lbf•ft)
XCITING 500
SPECIFICATIONS
66 kg (145.2 lbs)
2.0 liter (2.1 US qt, 1.8 lmp qt)
2.5 liter (2.7 US qt, 2.2 lmp qt)
2.1 liter (2.2 US qt, 1.9 lmp qt)