KYMCO XCITING 500 Service Manual page 203

11. FINAL REDUCTION
Check the oil seal and bearings in the left
crankcase for wear or damage.
BEARING REPLACEMENT
(TRANSMISSION CASE)
Remove the countershaft or final gear shaft
bearing using the special tool.
Special tool:
Bearing puller E037
Apply engine oil to new bearings cavities.
Drive new bearings into the transmission
case.
Special tool:
Oil seal & bearing driver
BEARING REPLACEMENT
(TRANSMISSION COVER)
Remove the final gear shaft oil seal.
Driveshaft Bearing
Countershaft Bearing
Oil Seal & Bearing Driver
E014
Oil Seal
XCITING 500
Bearing Puller
Final Gear Shaft Bearing
11-6