14.STEERING HANDLEBAR/FRONT WHEEL/
FRONT SHOCK ABSORBER
Align the holes on the handlebar with the pins
on the handle post.
Install the handlebar to the handle post.
Install the upper holders with its punch marks
facing toward.
Install the upper holder bolts.
Tighten the front bolts first, then tighten the
rear bolts.
Torque: 23 N•m (2.3 kgf•m, 17 lbf•ft)
Install the throttle grip and bolt/right
handlebar weight and tighten the bolt.
14-17
Pins
Holder Bolts
Bolt/Right Handlebar Weight
XCITING 500
Holes
Throttle Grip