KYMCO XCITING 500 Service Manual page 293

16
. BRAKE SYSTEM
INSTALLATION
Install the delay valve and tighten the nuts
securely.
Install the brake hose eyelets and new sealing
washers.
Tighten the brake hose bolt to the specified
torque while rest the brake hose eyelet
against the stopper on the delay valve.
Torque: 35 N•m (3.5 kgf•m, 25 lbf•ft)
Fill the reservoir to the upper level and bleed
the brake system (page 16-8).
16-23
Nuts
Delay Valve
Sealing Washers
Bolts
XCITING 500
Sealing Washers
Brake Hose