KYMCO XCITING 500 Service Manual page 175

9. CYLINDER/PISTON
Install the gasket.
Apply engine oil to the cylinder wall, piston
and piston ring outer surfaces.
Pass the cam chain through the cylinder and
install the cylinder over the piston.
＊
Be careful not to damage the piston rings
and cylinder walls.
Install and tighten the two cylinder bolts to
specified torque.
Torque: 10 N•m (1 kgf•m, 7 lbf•ft)
Install the block pin.
Connect the water hose.
9-9
Bolts Cylinder/Gasket
XCITING 500
Block Pin
Water Hose