Crankcase Breather; Spark Plug - KYMCO XCITING 500 Service Manual

3
. INSPECTION/ADJUSTMENT
Remove the air cleaner element by pull it out.
Discard the air cleaner element.
Install a new air cleaner element. Use the
KYMCO genuine air cleaner element or an
equivalent air cleaner element specified for
your model. Using the wrong. KYMCO air
cleaner element or a non-KYMCO air cleaner
which is not of equivalent quality may cause
premature engine wear or performance
problems.
Install the removed parts in the reverse order
of removal.

CRANKCASE BREATHER

Remove the crankcase breather tube plug
from the tube and drain deposits into a
suitable container.
Reinstall the crankcase breather tube plug.
Service more frequently when riding in rain,
at full throttle, or after the scooter is washed
or overturned. Service if the deposit level can
be seen in the transparent section of the drain
tube.

SPARK PLUG

REMOVAL
Remove the spark plug maintenance lid (page
2-4).
Disconnect the spark plug cap and clean
around the spark plug base.
＊
Clean around the spark plug base with
compressed air before removing, and be
sure that no debris is allowed to enter the
combustion chamber.
3-7
XCITING 500
Screws
Air Cleaner Element
Spark Plug Cap