KYMCO XCITING 500 Service Manual page 286

Hide thumbs Also See for XCITING 500:
Table of Contents

Advertisement

16
. BRAKE SYSTEM
ASSEMBLY
Install the brake light switch and tighten the
screw to the specified torque.
Torque: 1 N•m (0.1 kgf•m, 0.7 lbf•ft)
Apply silicone grease to the master piston tip.
Install the brake lever.
Apply silicone grease to the brake lever pivot
bolt sliding surface.
Install and tighten the pivot bolt to the
specified torque.
Torque: 6 N•m (0.6 kgf•m, 4.3 lbf•ft)
Install and tighten the pivot nut to the
specified torque.
Torque: 6 N•m (0.6 kgf•m, 4.3 lbf•ft)
INSTALLATION
Align the pin on the master cylinder holder
with the hole on the handlebar.
Brake Light Switch
Screw
Nut
Brake Lever
Pin
XCITING 500
Pivot Bolt
Hole
16-16

Advertisement

Table of Contents
loading

Table of Contents