KYMCO XCITING 500 Service Manual page 281

16
. BRAKE SYSTEM
Tighten the pad pin to the specified torque.
Torque: 18 N•m (1.8 kgf•m, 13 lbf•ft)
Install the pad pin plug to the specified
torque.
Torque: 3 N•m (0.3 kgf•m, 2.2 lbf•ft)
Rear/Parking brake:
Remove the pad pin plug and loosen the pad
pin.
＊
Always replace the brake pads in pairs to
ensure even disc pressure.
Remove the mount bolts and rear/parking
brake caliper from the rear fork.
Remove the pad pin and brake pads.
16-11
Pad Pin
Pad Pin Plug
Rear/Parking Caliper Body
XCITING 500
Pad Pin Plug
Pad Pin
Bolts