KYMCO XCITING 500 Service Manual page 344

20
. LIGHTS/METERS/SWITCHES
INSPECTION
Connect the fuel unit wire connectors and turn
the ignition switch "ON".
＊
Before performing the following test,
operate the turn signals to determine that
the battery circuit is normal.
Check the fuel meter for correct indication by
moving the fuel unit float up and down.
Float Position
Upper
Lower
Wire Terminals
Free
Apply
The fuel meter is normal if it operates as above
indicated. If not, check for poorly connected
terminals or shorted wires.
INSTALLATION
Install the O-ring and fuel unit.
＊
Align the groove on the fuel unit with
the flange on the fuel tank.
Display
Much (Full)
Less (Empty)
Display
From Much to Less
From Less to Much
Upper
Lower
XCITING 500
Groove
Flange
20-14