KYMCO XCITING 500 Service Manual page 159

8. CYLINDER HEAD/VALVES
Install the water stop collar, gasket and water
joint.
Install and tighten the two bolts to the
specified torque.
Torque: 12 N•m (1.2 kgf•m, 9 lbf•ft)
.
Install gasket and pair reed valve.
Install and tighten the four bolts securely.
Install the new O-rings onto the insulator and
intake pipe.
8-17
Bolts Water Stop Collar Gasket
Pair Reed Valve Gasket
Bolts
O-ring
XCITING 500
Water Joint
O-ring