Oil Pressure Switch; Oil Pressure Relief Valve - KYMCO XCITING 500 Service Manual

4
. LUBRICATION SYSTEM XCITING 500
Dust Cover

OIL PRESSURE SWITCH

CHECK
Start the engine.
Check the oil pressure indicator goes out after
one or two seconds. If the oil pressure
indicator stay on, stop the engine
immediately and determine the cause (section
20).

Oil Pressure Relief Valve

OIL PRESSURE RELIEF VALVE
REMOVAL
Remove the right crankcase cover (page 12-
3).
Remove the pressure relief valve and O-ring
from the right crankcase
O-ring
Piston
PUSH
INSPECTION
Check the operation of the pressure relief
valve buy pushing on the piston.
INSTALLATION
Apply oil to a new O-ring and install the
pressure relief valve groove, and install the
relief valve to the right crankcase.
Oil Pressure Relief Valve
4-4