KYMCO XCITING 500 Service Manual page 199

11. FINAL REDUCTION
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• The servicing operations of this section can be made with the engine installed.
• When replacing the drive shaft, use a special tool to hold the bearing inner race for this operation.
SPECIFICATIONS
Specified Oil: SAE 90#
Oil Capacity:
At disassembly : 0.55 L (0.57 US qt, 0.5 Imp qt)
At change
TORQUE VALUES
Transmission case cover bolt
Oil drain bolt
Oil filler bolt
SPECIAL TOOLS
Bearing puller
Oil seal & bearing driver
Universal bearing puller
TROUBLESHOOTING
Engine starts but motorcycle won't move
• Damaged transmission
• Seized or burnt transmission
• Faulty drive and driven pulleys/clutch
Abnormal noise
• Worn, seized or chipped gears
• Worn bearing
Oil leaks
• Oil level too high
• Worn or damaged oil seal
• Cracked crankcase
: 0.45 L (0.48 US qt, 0.4 Imp qt)
27 N•m (2.7 kgf•m, 20 lbf•ft)
24 N•m (2.4 kgf•m, 18 lbf•ft)
24 N•m (2.4 kgf•m, 18 lbf•ft)
E037
E014
E030
XCITING 500
11-2