16
. BRAKE SYSTEM
REAR MASTER CYLINDER
REMOVAL
When removing the brake hose bolt, cover
the end of the hose to prevent contamination.
Secure the hose to prevent fluid from leaking
out.
Remove the upper handlebar cover (page 2-
5).
Drain the combination brake hydraulic
system (page 16-5).
Remove the two screws and lower handlebar
cover.
Disconnect the brake light switch connectors
from master cylinder.
Remove the brake hose oil bolt, sealing
washers and brake hose eyelet.
XCITING 500
Lower Handlebar Cover
Screws
Brake Light Switch Connectors
Sealing Washers
Brake Hose
16-18
Bolt