Thermostat - KYMCO XCITING 500 Service Manual

6
. COOLING SYSTEM
Bleed air from the system as follow:
1. Start the engine and let it idle for 2−3
minutes.
2. Snap the throttle three to four times to
bleed air from the system.
3. Stop the engine and add coolant to the
proper level if necessary. Reinstall the
radiator cap.
4. Check the level of coolant in the reserve
tank and fill to the upper level if it is
low.

THERMOSTAT

REMOVAL
Remove the floorboard (page 2-6).
Remove the ignition coil (page 18-5).
Remove the nut and thermostat housing
stay from the frame.
Remove the bolts, housing stay and
thermostat housing cover.
Housing Stay Housing Cover
Bolts
XCITING 500
Nut
Housing stay
6-8