KYMCO XCITING 500 Service Manual page 291

16
. BRAKE SYSTEM
Install the rear master cylinders and holders
with the "UP" mark facing up.
Install the bolts and tighten the upper bolt
first then tighten the lower bolt to the
specified torque.
Torque: 12 N•m (1.2 kgf•m, 9 lbf•ft)
Rest the brake hose eyelet against the stopper.
Install the brake hose eyelet with the oil bolt
and new sealing washers.
Tighten the oil bolt to the specified torque.
Torque: 35 N•m (3.5 kgf•m, 25 lbf•ft)
Connect the brake light switch connectors.
Fill the reservoir to the upper level and bleed
the brake system (page 16-8).
16-21
"UP" Mark Master Cylinder
Sealing Washers
Brake Hose
Brake Light Switch Connectors
XCITING 500
Bolt
Bolt