KYMCO XCITING 500 Service Manual page 44

2
. FRAME COVERS/ EXHAUST MUFFLER
RIGHT/LEFT SIDE BODY COVER
REMOVAL
Remove the luggage box (page 2-3).
Remove the floorboard (page 2-6).
Remove the rear spoiler (page 2-4).
Remove two bolts.
Raise the side body cover, disconnect the
taillight/rear turn signal light connector and
remove the side body cover.
INSTALLATINON
Installation is in the reverse order of removal
REAR BODY COVER
REMOVAL
Remove the luggage box (page 2-3).
Remove the rear spoiler (page 2-4).
Remove two screws and rear body cover.
＊
Be careful not to damage the tabs on the
rear body cover.
INSTALLATION
Installation is in the reverse order of removal.
Bolts
Taillight/Rear Turn Signal Light Connector
Screws
XCITING 500
2-8