Toner Suction Fan Removal - Lexmark MS911 Service Manual

Toner suction fan removal

1
Remove the left cover. See
2
Remove the rear left cover. See
3
Remove the port access door. See
4
Remove the controller board access cover. See
5
Remove the engine board cover. See
6
Remove the scanner interface cable cover. See
7
Remove the upper rear cover. See
8
Disconnect the cable (A), and then remove the two screws (B).
"Left cover removal" on page
"Rear left cover removal" on page
"Port access door removal" on page
"Controller board access cover removal" on page
"Engine board cover removal" on page
"Scanner interface cable cover removal" on page
"Upper rear cover removal" on page
Repair information
327
223.
224.
228.
289.
289.
4021
287.
286.