Motor bracket removal
Note: This part is not a FRU.
1
Remove the right cover. See
2
Remove the rear cover. See
3
Disconnect the four cables (A).
4
Remove the ten screws (B), and then remove the bracket.
3000-sheet tray feed and transport motors removal
1
Remove the right cover. See
2
Remove the rear cover. See
3
Remove the motor bracket. See
#
1
Sensor (3000-sheet tray near empty 1)
2
Sensor (3000-sheet tray near empty 2)
"3000-sheet tray right cover removal" on page
"3000-sheet tray rear cover removal" on page
A
B
"3000-sheet tray right cover removal" on page
"3000-sheet tray rear cover removal" on page
"Motor bracket removal" on page
Repair information
406
Part
392.
393.
A
392.
393.
406.
4021
B