Sensor (2500-Sheet Paper Stack Transfer) Removal; Sensor (2500-Sheet Tray Elevator Home) Removal - Lexmark MS911 Service Manual

Sensor (2500‑sheet paper stack transfer) removal
1
Remove the tray insert.
2
Disconnect the cable (A), and then remove the two screws (B).
3
Remove the sensor from its housing on the division board.
Sensor (2500‑sheet tray elevator home) removal
1
Remove the tray insert.
2
Remove the 2500-sheet tray elevator home sensor actuator. See
removal" on page 338.
"2500‑sheet tray elevator home sensor actuator
Repair information
353
4021