Streaked Horizontal Or Vertical Lines Check - Lexmark MS911 Service Manual

Actions
Step 4
a
Check the registration belt for proper tension, and then adjust if
necessary.
b
Check the registration gear and belt for wear or damage, and replace
if necessary. See "Registration unit belt removal" on page 269
"Registration unit gears removal" on page
Does the problem remain?
Step 5
Check the following rollers for wear or damage, and replace if necessary:
•
Pick roller
•
Feed roller
•
Separator roller
•
Transport roller
Does the problem remain?
Step 6
a
Check the roller belts for proper tension, and then adjust if necessary.
b
Check the roller gears and belts for wear or damage, and replace if
necessary.
Does the problem remain?

Streaked horizontal or vertical lines check

Actions
Step 1
a
Make sure that the photoconductor and printhead are clean.
b
Make sure that the photoconductor and printhead are properly
installed.
c
Check the photoconductor for damage, and replace if necessary.
Does the problem remain?
and
270.
Diagnostic information
49
Yes No
Go to step 5. The problem is solved.
Go to step 6. The problem is solved.
Contact the next level The problem is solved.
of support.
Yes No
Go to step 2. The problem is solved.
4021