Sensor (Fusing Speed) Removal; Fusing Speed Actuator Removal - Lexmark MS911 Service Manual

Sensor (fusing speed) removal

1
Remove the registration unit assembly. See
2
Remove the registration unit sub-assembly. See
3
Disconnect the cable (A), and then remove the sensor.

Fusing speed actuator removal

Note: This part is not a FRU.
1
Remove the registration unit assembly. See
2
Remove the registration unit sub-assembly. See
3
Release the spring (A), and then remove the actuator.
"Registration unit assembly removal" on page
"Registration unit sub-assembly removal" on page
"Registration unit assembly removal" on page
"Registration unit sub-assembly removal" on page
Repair information
267
4021
263.
265.
263.
265.