Reports; Size Sensing; Tray Linking; Panel Menus - Lexmark MS911 Service Manual

Reports

Menu Settings Page
This report lists of the Configuration Menu settings and the value of each setting.
1
Enter the Configuration Menu, and then navigate to:
Reports > Menu Settings Page
2
Return to the Configuration Menu screen.
Event Log
This setting prints a report of the detailed events in the print log. See
1
Enter the Configuration Menu, and then navigate to:
Reports > Event Log
2
Return to the Configuration Menu screen.

SIZE SENSING

This setting controls whether the printer automatically registers the size of the paper loaded in a tray with a size-sensing
mechanism.
Enter the Configuration Menu, and then select SIZE SENSING.
Note: Due to engine limitations, trays 1 through 4 cannot simultaneously sense the following paper sizes:
• Oficio/Folio
•
Statement/A5
•
Executive/B5
The value of each setting determines which of the paper sizes the trays sense automatically. The values apply to all
automatic trays except for the multipurpose feeder. The multipurpose feeder supports these paper sizes regardless of
the value of this setting.

Tray Linking

This setting enables the printer to link automatically the trays that contain the same paper type and size.
1
Enter the Configuration Menu, and then select Tray Linking.
2
Select a setting.
3
Apply the changes.

Panel Menus

This setting determines whether to enable access to the printer menus.
1
Enter the Configuration Menu, and then select Panel Menus.
2
Select a setting.
"Print Log" on page
Service menus
189
4021
187.