Data Security Notice - Lexmark MS911 Service Manual

Paper type
Card Stock
1
Transparency
Recycled
Glossy
Heavy Glossy
Labels
Bond
Envelope
Rough Envelope
Letterhead
Preprinted
Colored Paper
Light Paper
Heavy Paper
Rough Cotton
Custom Type
1
Print on transparencies by batches of only up to 20 to prevent them from sticking together. For more information, see
"Tips on using transparencies" on page
2
Paper is supported only if the finisher stacks the paper but does not staple it.
3
Paper is supported only if the finisher stacks the paper but does not staple or punch holes in it.
4
Paper is supported only if the finisher punches holes or stacks the paper but does not staple it.
5
Paper is supported only if the finisher staples or folds the paper.

Data security notice

1
The printer contains various types of memory that store device and network settings, information from embedded
solutions, and user data.
The following are the types of memory and data that they store.
• Volatile memory—The printer uses standard random access memory (RAM) to buffer user data temporarily
during simple print and copy jobs.
•
Non-volatile memory—The printer may use two forms of non-volatile memory: EEPROM and NAND (flash
memory). Both types are used to store the operating system, device settings, network information, scanner and
bookmark settings, and embedded solutions.
Staple finisher Staple, hole punch finisher
2
2
2
2
2
2
2
2
2
2
29.
General information
37
Booklet finisher
3
4
3
3
3
4
4021
X
X
5
5
X
X
5
X
X
5
5
5
5
X
X
5