Duplex Transport Clutch Removal - Lexmark MS911 Service Manual

6
Remove the screw (A), and then remove the guide. Remove the three screws (B), and then release the cables from
the guides.
7
Remove the assembly.

Duplex transport clutch removal

1
Remove the port access door. See
2
Remove the controller board access cover. See
3
Remove the engine board cover. See
4
Remove the scanner interface cable cover. See
5
Remove the upper rear cover. See
6
Open the controller board frame. See
"Port access door removal" on page
"Controller board access cover removal" on page
"Engine board cover removal" on page
"Scanner interface cable cover removal" on page
"Upper rear cover removal" on page
"Controller board frame removal" on page
Repair information
323
228.
289.
289.
305.
4021
287.
286.