Load [Paper Source] With [Paper Size] [Paper Orientation]; Load [Paper Source] With [Paper Type] [Paper Size] [Paper Orientation]; Load Multipurpose Feeder With [Custom String] [Paper Orientation]; Load Multipurpose Feeder With [Custom Type Name] [Paper Orientation] - Lexmark MS911 Service Manual

Load [paper source] with [paper size] [paper orientation]

Try one or more of the following:
•
Load the tray or feeder with the correct size of paper, and then touch Finished loading paper on the control panel.
•
Touch Reset active bin to reset the active bin for a linked set of bins.
• Cancel the current job.

Load [paper source] with [paper type] [paper size] [paper orientation]

Try one or more of the following:
•
Load the specified tray or feeder with the correct size and type of paper, and then touch Finished loading paper
on the control panel.
•
Touch Reset active bin to reset the active bin for a linked set of bins.
• Cancel the current job.

Load Multipurpose Feeder with [custom string] [paper orientation]

Try one or more of the following:
• Load the feeder with the correct size and type of paper.
•
From the control panel, touch one of the following:
– Prompt each page, paper loaded or Do not prompt, paper loaded—To clear the message and continue printing.
–
Automatically select paper—To use the paper loaded in the tray.
–
Reset active bin—To reset the active bin for a linked set of bins.
• Cancel the print job.

Load Multipurpose Feeder with [custom type name] [paper orientation]

Try one or more of the following:
• Load the feeder with the correct size and type of paper.
•
From the control panel, touch one of the following:
–
Prompt each page, paper loaded or Do not prompt, paper loaded—To clear the message and continue printing.
–
Automatically select paper—To use the paper loaded in the tray.
–
Reset active bin—To reset the active bin for a linked set of bins.
•
Cancel the print job.

Load Multipurpose Feeder with [paper size] [paper orientation]

Try one or more of the following:
• Load the feeder with the correct size of paper.
•
From the control panel, touch one of the following:
–
Prompt each page, paper loaded or Do not prompt, paper loaded—To clear the message and continue printing.
– Automatically select paper—To use the paper loaded in the tray.
–
Reset active bin—To reset the active bin for a linked set of bins.
Diagnostic information
104
4021